Short answer: Banging during spin usually means an unbalanced load, worn suspension or a machine that isn't level. A roaring or rumbling noise that gets louder over months means worn drum bearings. Grinding or rattling often means a coin or hair clip trapped between the drum and tub or in the pump. Humming without movement points to a jammed pump or a motor that can't turn.
Decode the Sound
Banging or thumping in spin: load bunched on one side, machine not level, or worn shock absorbers or suspension rods. Rebalance and level it; if it continues, the suspension needs replacing.
Roaring like a jet engine: drum bearings. Gets worse over weeks. Don't delay; worn bearings can damage the tub.
Rattling or scraping: coins, keys or underwire between drum and tub, or a stone in the pump. A technician can retrieve them.
Humming but nothing moves: drain pump jammed, or a motor or capacitor problem.
Squealing: a worn belt or pulley on belt-driven machines.
Clicking: sometimes normal (valves and the door lock), sometimes a relay on the board.
Walking across the floor: uneven floor, unlevelled feet, or transit bolts still fitted on a new front-loader.
When to Stop Using the Machine
Stop if you hear grinding metal, smell burning, or the machine moves violently. Otherwise, rebalance, level it and check for transit bolts, then book a check if the noise continues.
Is bearing replacement worth it?
On a machine under seven or eight years old, usually yes. Repair cost guide
